LINKOH Unmanaged Switch PoE with 8 Ports 10/100M and 2GE Uplink

LINKOH, 8-Port 10/100TX 802.3at PoE + 2-Port 10/100/1000Mbps RJ45 Desktop Switch (120 watts)

Unmanaged PoE switch with 8*10/100M PoE port and 2*10/100/1000M uplink RJ45 port . Port1-8 can support IEEE 802.3af/at PoE international standard,Port 1 suport 60W. 1-8 port suport VLAN isolation ,10M/250m long distance transmission and PD Alive checking function . Build-in 120W power supply.

  • Ideal PoE Solution for PoE IP Surveillance
  • Port 1 supports Hi-PoE 60W output
  • PoE and Data Transmission up to 250M
  • VLAN for Broadcast Storm Control
  • Unmanaged PD-Alive Check for Frozen PDs
  • Easy Cable Connection


Contact Us
SKU: LK3200-8P2G Category:

LK3200-8P2G is an unmanaged PoE switch with 8*10/100M PoE port and 2*10/100/1000M uplink RJ45 port .  It is compatible with standard, while first port support Hi-PoE 60W output. Meanwhile the PoE switch supports one key set up Extend (  also called CCTV or 250M), VLAN and Stanard working modes. It also supports unmanaged PoE PD-alive function to reboot frozen PDs. It greatly reduces the project maintenance difficulty.

Ideal PoE Solution for PoE IP Surveillance

LK3200-8P2G brings you an ideally secure surveillance system at a lower total cost. The product provides 802.3at PoE+ ports able to feed sufficient PoE power to IEEE 802.3af/IEEE 802.3at PoE+ IP cameras at the same time. It is also able to connect with  NVRs, uplinked to backbone switch and the monitoring center. With such a high-performance switch architecture, the recorded video files from the PoE IP cameras can be saved to the NVR system where the administrator can control and monitor the surveillance images in both the local LAN and remote sites.


PoE and Data Transmission up to 250M

The switch has a DIP switch providing “Standard” and “Extend” operation modes. The switch operates as a normal IEEE 802.3at PoE+ Switch in the “Standard” operation mode. In the “Extend” operation mode, operates on a per-port basis at 10Mbps full duplex operation and can support 10~15-watt PoE power output over a distance of up to 250 meters, overcoming the 100-meter limit on Ethernet UTP cable.



VLAN for Broadcast Storm Control

The switch features “VLAN”function with the downlink ports isolated from each other via one DIP switch.  This can help to prevent the IP camera’s multicast or broadcast storm from influencing each other, thus fully meeting the requirements of the IP surveillance systems and Ethernet projects.

Unmanaged PD-Alive Check for Frozen PDs

The switch can be configured to monitor connected PD status in real time. Once the PD stops working and responding, the switch will resume the PoE port power and bring the PD back to work. They will greatly enhance the network reliability through the PoE port resetting the PD’s power source and reducing administrator management burden.

Easy Cable Connection
With data switching and Power over Ethernet integrated into one unit, the LK3000 series reduces cabling requirements and eliminates the need for electrical outlets on the wall, ceiling or any unreachable place. A wire that carries both data and power can lower the installation costs, simplify the installation effort and eliminate the need for electricians or extension cords.


Model LK3200-8P2G
Copper Ports 8 10/100BASE-T RJ45 auto-MDI/MDI-X ports

2-10/100/1000BASE-T auto-MDI/MDI-X ports

PoE Ports 8-802.3af/802.3at PoE Injector Ports
Working Mode CCTV mode: PoE power up to 250M while bandwidth 10Mbps

VLAN mode: 1-8 ports are isolated from each other and separately work with the 9/10 ports

Switch Architecture Store-and-Forward
Switch Fabric 5.6Gbps/non-blocking
Throughput 4.16Mpps @64 bytes
Address Table 2K, Auto–learning, Auto-aging
Share Data Buffer 2.5Mb
Flow Control IEEE 802.3x pause frame for full-duplex, Back pressure for half-duplex
PoE Standard IEEE; port 1 support up to 60W PoE output, port 2-8 up to 30W
PSE Power on RJ-45 Mode A  1/2(+),3/6(-), end-span
PoE Total 120W
Fan Fanless
LED Indicator Power: Green

Solid on- power work normal, off- power disconnected, blink- port short circuit or current over-load

10/100 T RJ45 Interfaces (Port 1 to Port 8):

LINK/Data (Green)

Solid on- port connected, blink- port connected with data transmission.

PoE (Yellow),

Solid on- PoE works normally,  off- PoE doesn’t work

10/100/1000RJ45 (Port 9-Port 10):

LINK/Data (Green)

Solid on- port connected, blink- port connected with data transmission.


10/100/1000M- Solid on; off- doesn’t work or speed is 10/100M

Network Media(Cable) 10BASE-T: UTP category 3, 5 cable (≤100m)

100BASE-TX: UTP category 5,5e cable (≤100m)

1000BASE-T: UTP category 5e,6 cable(≤100m)

Certification CE, FCC Class B
Surge Protection ±4KV
Dimension 210mm*150mm*35mm
Weight <1.2Kg
Working Temperature -10 ℃to 45℃
Storage Temperature  -20℃ to 70 ℃
MTBF 50,000hrs

Contact Us