Industrial Lite Management Switch PoE 8 Ports Gigabit with 2GE SFP—BP sensor

Industrial Lite Management Switch PoE 8 Ports Gigabit with 2GE SFP—BP sensor

LINKOH LK8010P8C2FM-BP Industrial Switch is an lite management Gigabit PoE Switch that features 8-Port Gigabit IEEE802.3af/at PoE + 2-Port Gigabit SFP optical port + sensor. And packed in an IP40-rated rugged case. Being able to operate under the temperature ranging from -40℃ to +75℃ and a wide-ranging redundant power system.It provides reliable, stable and continuous long-range data transmission and can be installed in any harsh environment without taking space into consideration. With the sensor can Check the ambient temperature and humidity.

  • Support VLAN, port management etc functions
  • Support PoE management functions, like PoE PD-alive check, Extend PoE Mode etc.
  • Port 1~2 supports BT 90W output, port 3~8 support AT 30W output
  •  Support perpetual PoE, reboot software or software upgrade  PoE non-stop
  • Wide voltage input: 48V-57V
  • Redundant power design, power polarity reverse protection
  • Support temperature and humidity detection with sensor
  • Support relay alarm
  • Wide working temperature: -40℃ to +75℃
  • Support 6KV surge protection,6KV contact /8KV air ESD protection
  • Support cloud management
Contact Us

LINKOH LK8010P8C2FM-BP Industrial Switch integrates the simplicity of unmanaged switches with the performance and reliability of managed switches to provide a cost-effective solution for users to integrate management at the edge of their network.


Auto PoE power adjustment for safety and energy saving

The PoE port of the Lite management switches support 802.3af and 802.3at, providing up to 30W power supply to the connected device. The switches will negotiate with the connected devices to automatically adjust the PoE power, thereby saving energy. In addition, when the PoE port is connected to a PC, DVR, or other non-PoE device, the switch will automatically identify the device and will not output power to such device to ensure equipment safety.

PoE and Data Transmission up to 250M

The 4 ports lite management PoE switch can configure Extend PoE mode of each port on the web interface. In the “Extend PoE” operation mode, operates on a per-port basis at 10Mbps full duplex operation and can support 8~15-watt PoE power output over a distance of up to 250 meters, overcoming the 100-meter limit on Ethernet UTP cable.

VLAN for Broadcast Storm Control

The lite management PoE switch provides convenient and flexible VLAN division, which can automatically divide different VLANs according to the type of equipment connected to the port, so that the surveillance network and data network do not interfere with each other, improving the stability of the entire network. This can help to prevent the IP camera’s multicast or broadcast storm from influencing each other, thus fully meeting the requirements of the IP surveillance systems and Ethernet projects.



The lite management PoE switch has Spanning Tree Protocol (STP) / Rapid Spanning Tree Protocol (RSTP) options. Predominantly used to prevent layer 2 loops and broadcast storms and is also used for network redundancy. It was developed around the time where recovery from an outage that took upwards of a minute or more was acceptable. Throughout the years, as technology improved and critical applications relied on stable connections, businesses moved away from these long recovery times and looked for faster solutions.


Open Network Video Interface Forum(ONVIF)

ONVIF refers to Open Network Video Interface Forum. ONVIF compliant devices can stream video over the Internet to compatible clients, providing a standard for interfaces between devices based on different IPs. The ONVIF protocol gives you the flexibility to pick the Camera, NVR, Video decoder, etc. that best suits your needs without being limited to a specific brand.


Dynamic Host Configuration Protocol(DHCP)

Dynamic Host Configuration Protocol (DHCP) is a client/server protocol. Client uses the DHCP to acquire configuration information, such as an IP address, a default route, and one or more DNS server addresses from a DHCP server. It automatically provides an Internet Protocol (IP) host with its IP address and other related configuration information, the process is automatic and managed centrally.


Link Aggregation Control Protocol(LACP)

LACP is used to bundle and maintaining multiple physical links into one logical link to increase bandwidth and improve link redundancy. LACP allows switches to dynamically negotiate and establish aggregation groups, and can automatically redistribute traffic when a link fails, thereby improving network reliability and performance.


Model LK8010P8C2FM-BP
Copper Ports 8-10/100/1000BASE-T RJ45 auto-sensing ports
Fiber Ports 2-100/1000BASE-T uplink SFP fiber slot ports
PoE Ports 8-802.3af/at, Port 1-2 -802.3bt
Switch Architecture Store-and-Forward
Switch Fabric 20Gbps/non-blocking
Throughput 14.88Mpps @64 bytes
Data Buffer 1.5 Mb
Jumbo Frame 9216 Bytes
Flash Memory 4Mb
Flow Control IEEE 802.3x pause frame for full-duplex; Back pressure for half-duplex
Reset Button >5 sec.: Factory default and reset
Power Supply 48 ~ 57 VDC, 50/60Hz, 2 Industrial terminal DC input
PoE Standards IEEE 802.3af Power over Ethernet/PSE

IEEE 802.3at Power over Ethernet Plus/PSE

IEEE Power over Ethernet Plus Plus/PSE

LED Indicators Power: Green

Solid on- power work normal, off- power disconnected

System: Green

Blink -work normally, off- soft work abnormal


10/100/1000T RJ45 Interfaces (Port 1 to Port 8):

PoE: Yellow

Solid on- PoE work normally, Off- PoE doesn’t work,

LNK/ACT (Green)

Fast Blink – port connected with data transmission; Slow blink-port connected without data transmission; Off- No port connection


1000Mbps SFP Interfaces (Port 9 to Port 10): Green

Solid on- port connected with data transmission; Off- No port connection;

EMC Surge Immunity:6KV   Per: IEC61000-4-5

ESD Protection: ESD Level 4 Per: IEC61000-4-2;

EFT Level 4 Per: IEC61000-4-4

Dimension 165*123*53.5mm
Weight 0.9kg


-40°C to 75°C
Storage Temperature -40℃ to 80 ℃
MTBF 50,000hrs

Contact Us