LINKOH Unmanaged Ethernet Switch with 2 10G Copper Ports

LINKOH Unmanaged Ethernet Switch with 2 10G Copper Ports

Multi-gigabit unmanaged ethernet switch is equied with 8*gigabit+ 2* 10G cooper port and 1* 10G SFP+. Most cost-effective switch with 10G uplinks for SMBs and Enterprise.

  • Ideal Solution for High-speed Networking Generation
  • High Switching Performance
  • Plug & Play design
  • Green Ethernet/ Energy Saving Design

 

Contact Us
SKU: LK2011XP10TC1F Category:

With the development of network, some devices requires larger bandwidth Ethernet switches, for example WIFI 6 APs, servers, network card etc. LK2011XP10TC1F is a cost effective solution for these projects. With 8*10/100/1000M Base-T ports,  2*10/100/1000/2500/10000M Base-T ports and 1*10G SFP+ ports, the switch can connect with various multigiga devices to meets the new SMB requirements

Ideal Solution for High-speed Networking Generation
With the increasing popularity of desktop and laptop with built-in gigabit/2.5G network Interface, and wide applications of shared database device and multimedia center , 1G /2.5G /10GEthernet Switch is expected to become the mainstream in the market. LINKOH LK2011XP10TC1F multi-gigabit Ethernet fiber switch is especially designed in a compact metal housing for high-speed network applications.

High Switching Performance
Providing 76G internal switching fabric and 9k jumbo frame ability, LK2011XP10TC1F can handle extremely large amounts of data in a secure topology linking to a backbone or high-capacity server. It offers wire-speed packet transfer performance without risk of packet loss. The high data throughput of the device makes it ideal for most Gigabit environments, especially for the network upgrading to a 1G/2.5G/10G environment.

Plug & Play design
All RJ45 copper interfaces in the switch support 10/100/1000/2500/10000Mbps auto-negotiation for optimal speed detection through RJ45 Category 6, 5 or 5e cabling. It supports standard auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight-through or crossover cables.

Green Ethernet/ Energy Saving Design
LK2011XP10TC1F features the technologies that can save energy up to 40% when compared with a normal switch without compromising its performance. It incorporates two advanced Green Networking technologies:
■ Low Power Idle Mode for power saving
■ Intelligent Scales Power based on cable length

With the Low Power Idle Mode feature, LK2011XP10TC1F implements the link-down power saving that complies with IEEE 802.3az Energy Efficient Ethernet (EEE) standard to automatically lower power for a given port when it is not linked. It will automatically adjust power usage of the ports that are shut down or not connected to the network device. Intelligent scales power is an intelligent algorithm that actively determines the appropriate power level based on cable length. When connecting to the switch with Ethernet cable shorter than 20m, a device can obtain maximum power saving because it would automatically detect the Ethernet cable length and reduce power usage. The connected device can substantially reduce the overall power consumption, which makes a significant contribution to energy saving.

Specifications

Model LK2011X10TC1F
Copper Ports 8 10/100/1000BASE-T;2 10/100/1000/2500/10G base-T RJ45 auto-MDI/MDI-X ports
Fiber Ports 1-10G BASE-X SFP+ interfaces
Switch Architecture Store-and-Forward
Switch Fabric 38Gbps/non-blocking
Throughput 56.54Mpps @64 bytes
Address Table 16K entries
Share Data Buffer 2Mb
Jumbo Frame 9600 Bytes
Flow Control IEEE 802.3x pause frame for full-duplex, Back pressure for half-duplex
PoE Standard  IEEE 802.3. AF/AT, Power device
Power Supply Power Device,max:30W
Power Consumption Less than 15W when PoE doesn’t work
LED Indicators Power: Green

Solid on- power work normal, off- power disconnected

Speed Indicator:

1000M( Yellow): solid on;2.5G/10G(Blue): solid on

 

LNK/ACT (Green),

Blink- port connected with data transmission; Solid on- port connected without data transmission

10G SFP Interfaces (Port 9): Yellow

Blink- port connected with data transmission; Solid on- port connected without data transmission

EMC Surge: IEC 61000-4-5 Level 3

EFT:IEC 61000-4-4 Level 3

ESD:IEC 61000-4-2 Level 3

Certification CE mark, commercial; CE/LVD EN60950;
FCC Part 15 Class B; RoHS
Dimension 280x213x45mm
Weight 1.1kg
Working Temperature -10 ℃to 50℃
Storage Temperature  -20℃ to 70 ℃
MTBF 50,000hrs